Precor SPINNER SHIFT User Manual

Chain Drive Tension Adjustment
About
This procedure provides instruction to verify and make adjustments to the chain drive. The
chain tension should be verified anytime the chain is replaced, at regularly scheduled pre-
ventative maintenance, or when there are any unusual belt related issues (noises, pedal skip,
etc.) while operating the bike.
CAUTION: Improper chain adjustment will cause premature wear and may void the
Precor Limited Warranty.
Specifications
System Component Specification
Chain Drive Tension 1/2 in (1.3 cm) up/dwn travel
Axle Nut torque 29.5 ft-lbs (40 Nm)
Available Movies
(Internet Only)
Chain Tension Adjustment
Procedure
Review entire procedure before starting.
Chain tension verification
1. First verify the chain tension by inserting a screwdriver into the chain tension inspection
window (rear chain guard) and gently moving the chain up and down. A properly
adjusted chain will have 1/2 in (1.3 cm) up/dwn travel. If the chain is too loose or too
11

Precor SPINNER SHIFT Specifications

General

Brand	Precor
Model	SPINNER SHIFT
Category	Exercise Bike
Language	English