Precor SPINNER SHIFT User Manual

Chain Drive Issues
Applies To
All chain drive spinner series bikes.
Issues
Issues related to the chain drive bikes:
l Issues
ISSUE CAUSE SOLUTION
Excessive
chain noise.
l Chain tension is either to
loose or tight.
l Chain misaligned.
Verify and adjust chain tension, see "Chain Drive
Tension Adjustment" on page11.
If tension is within spec, inspect belt condition and
replace if worn, see "Belt and Flywheel Replace-
ment" on page21.
Scraping rub-
bing noise
from flywheel.
Flywheel misaligned
and rubbing frame
forks.
Check chain sprocket alignment, see "Chain
Drive Tension Adjustment" on page11.
Jerky pedal
movement.
Chain is skipping teeth
due to:
l Chain tension to loose.
l Worn chain.
l Worn sprocket teeth.
Verify chain tension. If tension within spec, check
the condition of chain and sprocket teeth, replace
as necessary, see "Chain Drive and Flywheel
Replacement" on page27.
Chain comes
off sprocket.
Bad front/rear sprocket
chain alignment.
Verify the chain sprocket alignment, see "Chain
Drive Tension Adjustment" on page11.
See Also
"Troubleshooting" on page57
60
5 Troubleshooting
Chain Drive Issues

Precor SPINNER SHIFT Specifications

General

Brand	Precor
Model	SPINNER SHIFT
Category	Exercise Bike
Language	English