Proton InteliSENS PD30 User Manual

Page 34 of 68
Proton Products InteliSENS PD30 Instruction Manual (Issue 1a)
Gauge Information
- Set the PID controller output voltage range (0 to 50%).
- Set the wire path distance between the gauge and the
PID controlled equipment (extruder or capstan).
- Set the response time of the PID controlled
equipment (extruder or capstan; typically 1s).
- Set the minimum line speed for PID controller operation.
- Set the diameter error proportional gain (0 to
100%).
- Set the diameter error integral gain (0 to 100%).
- Select the PID controller output polarity from options:
Normal; Reverse.
Press the button to return to the home page.
Press the button to access the function menu page.
Press the button to advance to the next page.
Press the Gauge Info icon on the function menu page to
access this page.
- Gauge hardware version.
- Gauge core version.
- Gauge application version.
- Gauge firmware issue date.
- CDI4 software version.
- CDI4 software issue date.
Press the button to return to the home page.
Press the button to access the function menu page.

Proton InteliSENS PD30 Specifications

General

Brand	Proton
Model	InteliSENS PD30
Category	Laundry Accessories
Language	English