Press the Store icon on the function menu page to access
this page.
- Select the parameter group (0 to 49) to retrieve and set
as active.
Gauge input parameters stored under a particular
parameter group which is previously set by the user
will be retrieved and become active for the gauge.
Input parameter groups which have never been set
by the user will have factory default input
parameter values.
Any changes to input parameter values will be saved to this
parameter group.
Press the button to return to the home page.
Press the button to access the function menu page.
Press the Statistics icon on the function menu page to access this
page.
- Set the statistics mode from options: Time; Length; One Reel.
- Set the statistics time (if “Statistics mode” is set to “Time”) or
length (if “Statistics mode” is set to “Length”).
- Standard deviation of all diameters sampled during the
statistics.
- Maximum diameter sampled during the statistics time.
- Mean of all diameters sampled during the statistics time.
- Minimum diameter sampled during the statistics time.
- Process capability Cp
- Process capability Cpk
- Count down of the remaining statistics time or length
until the next statistics result.
Press the button to return to the home page.
Press the button to access the function menu page.
To Next Page
Loading...
Need help?
General
