Page 2
About the IMP
IMPIMP
IMP+
++
+ Level Monitoring System
Functional Description
The IMP
IMPIMP
IMP+
++
+ level monitoring system is a highly developed ultrasonic level
measurement system which provides non-contacting level measurement for
a wide variety of applications in both liquids and solids. Its unique design
allows for both 3 wire and 2 wire (loop powered) configuration all within
the same unit.
Easy calibration and maintenance free “fit and forget” performance mean
that you can install the IMP
IMPIMP
IMP+
++
+ Level Monitoring System rapidly and with
confidence. Two relays which can be configured for either alarm or control
functions, with fully programmable setpoints are provided when connected
as a 3 wire device, together with fault condition being indicated by the mA
output on both the 2 and 3 wire mode.
The IMP+
IMP+IMP+
IMP+ operates on the principle of timing the echo received from a
measured pulse of sound transmitted in air and utilises “state of the art”
echo extraction technology.
IMP+
IMP+IMP+
IMP+ comes in three models: IMP 3 with a range from 0.20m (0.66 feet) to
3.00m (9.84 feet), IMP 6 with a range of 0.3m (0.98 feet) to 6.00m (19.69
feet) and IMP 10 with a range of 0.3m (0.98 feet) to 10.00m (32.81 feet).
To Next Page
Loading...
Need help?
General
