TMS STRING PINSPOTTER OWNER’S MANUAL
400-051-010-01 Rev. Date: 7/17 Page 1-4
Safety
The TMS Tenpin String Pinspotter has been designed to be a reliable and safe machine. As with
any piece of equipment that utilizes motors, gears, chains, and other moving parts, there are a
few general safety precautions that must be followed to ensure that those who use, operate, or
maintain this machine are provided with the safest environment possible. Failure to follow these
safety precautions can result in severe personal injury. The “Declaration of Incorporation” and
“Declaration of Conformity” provided by QubicaAMF (required by the European Union) is
fulfilled only if the following safety requirements are met and incorporated along with the
machinery supplied.
Read, understand, and follow all of the precautions and procedures outlined in this
manual.
This machine contains high voltage. The controller circuit board and pin
detector circuit board contain no user serviceable parts. Do not open any
electrical panel or attempt to work on any electrical equipment or cable while
electrical power is supplied to the machine. Opening panels that have tamper
indicators will void the warranty.
Never operate the pinspotter with any guard or panel removed unless specifically
required for the maintenance or adjustment being performed. Never place the
machine into service with any guard or panel removed or disabled.
This machine contains pinching hazards such as gears, chains, pulleys, springs,
strings, and other moving parts. Keep hands and fingers away from these areas.
This machine can start suddenly and automatically. De-energize the machine
before servicing unless power is specifically required for the adjustment or
service being performed. See LOTO procedure instructions.
Bowling balls and scattering pins can cause severe injury. Do not stand in front
of the machine or in the pit area behind the machine, or place hands, arms, or
head in the area behind the machine above the pit without first assuring that no
one is positioned to bowl. See Lock Out/Tag Out (LOTO_) and pin-hook
instructions.
The end user or operator of the machine must employ a barricade to bowlers or
physically prevent the possibility of bowling during any maintenance operation.
Allow only authorized personnel to access any of the machine’s components.
Never install or operate this equipment in the vicinity of a water jet. This
machine is designed for indoor use only.
Do not wear long hair, neckties, necklaces, or loose clothing or jewelry around
rotating machinery, pulleys, or gears.
To Next Page
Loading...
Need help?
General
