TMS STRING PINSPOTTER OWNER’S MANUAL
400-051-010-01 Rev. Date: 7/17 Page 1-13
E-STOP
An emergency stop (E-Stop) pushbutton is provided to shut down the machine rapidly
should the need arise. This pushbutton shuts down both pinspotters and is located on the
face of the control chassis. Some configurations where 10Pin-Swap is enabled as the
Game also include an E-Stop pushbutton at the front of the machines. To restart the
machines from an emergency stop condition:
1. Rotate the E-Stop pushbutton clockwise (chassis) or pull it (front) until it pops out.
2. Press the blue E-Stop Reset Button located just below the Emergency Stop Button on
the front of the control chassis.
3. Press the TRBL CLEAR pushbutton on the keypad. The word PASSWORD will
flash at the bottom of the display.
4. Enter the Trouble Clear password. The unlocked symbols flash on the display and
the flashing E-STOP message for the selected lane turns off.
5. Press the EVEN/ODD pushbutton on the keypad to select the other lane.
6. Press the TRBL CLEAR pushbutton again. The flashing E-STOP message for the
other lane turns off. The machines return to their previous operating Mode.
For more on passwords, see the subsection on passwords later in this section.
To Next Page
Loading...
Need help?
General
