Quectel BC95 Hardware Design

NB-IoT Module Series
BC95 Hardware Design
BC95_Hardware_Design Confidential / Released 2 / 51
About the Document
History
Revision
Date
Author
Description
1.0
2016-11-30
Bryant CHEN/
Mark ZHANG
Initial
1.1
2017-01-24
Bryant CHEN/
Mark ZHANG
1. Modified module’s current consumption in PSM.
2. Changed the name of BC95 variants from BC95
-CM/BC95-SL/BC95-VF to BC95-B8/BC95-B5/B
C95-B20.
3. Enabled main port to upgrade firmware.
4. Updated current consumption in Table 23.
1.2
2017-03-15
Bryant CHEN/
Mark ZHANG
1. Deleted information of SWD interface.
2. Modified typical supply voltage of the module.
3. Added the power saving information.
4. Modified the UART level match circuit.
5. Updated bottom dimensions of the module.
1.3
2017-06-15
Ewent LU/
Mark ZHANG
1. Added Band 28 in Table 1.
2. Updated data transmission feature and module
weight in Table 2.
3. Updated the description of operating modes in
Chapter 3.4.
4. Updated the description of resetting the module
in Chapter 3.6.3.
5. Updated the description of power saving mode
in Chapter 3.7.
6. Added information about electrostatic discharge
characteristics in Table 23.
7. Updated the description of installing the antenna
with RF connector in Chapter 4.7.
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English