1. Modified GSM features in Table 2.
2. Added a note for e-I-DRX in Chapter 3.3.
3. Elaborated the description of e-I-DRX in Chapter 3.4.3.
4. Updated RF receiving sensitivity in Chapter 6.6.
1. Added the storage temperature of the module in Table
2 and Chapter 6.3.
2. Updated transmitting power values in Table 2.
3. Added the description of sleep mode in Table 5 and
Chapter 3.4.4.
4. Added the description of ADC interfaces in Chapter
3.16.
5. Updated the GNSS performance in Table 21.
6. Updated the peak supply current values in Table 28.
7. Updated the current consumption values in Chapter
6.4.
8. Updated RF output power values in Table 34.
9. Updated LTE Cat NB1 RF receiving sensitivity values
(without repetitions) in Table 35.
10. Updated the recommended footprint in Chapter 7.2.
1. Updated the USB interface reference design (Figure
15).
2. Added the description of GPIO interfaces (Chapter
3.17).
3. Updated GNSS performance parameters in Table 25.
4. Updated the GNSS antenna interface reference design
(Figure 27).
5. Updated GNSS current consumption parameters in
To Next Page
Loading...
Need help?
General
