LPWA Module Series
BG96 Hardware Design
BG96_Hardware_Design 64 / 79
1.
1)
LTE Cat NB1 receiving sensitivity without repetitions.
2.
2)
LTE-FDD B25 is supported on BG96 of R1.2 hardware version.
6.7. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the electrostatic discharge characteristics of BG96 module.
Table 38: Electrostatic Discharge Characteristics
Main/GNSS Antenna
Interfaces
To Next Page
Loading...
Need help?
General
