Quectel BG96 User Manual

LPWA Module Series
BG96 Hardware Design
BG96_Hardware_Design 44 / 79
Table 19: Default Behaviors of RI
The default RI behaviors can be configured flexibly by AT+QCFG=“urc/ri/ring” command. For more
details, please refer to document [2].
3.15. USB_BOOT Interface
BG96 provides a USB_BOOT pin. During development or factory production, USB_BOOT can force the
module to boot from USB port for firmware upgrade.
Table 20: Pin Definition of USB_BOOT Interface
The following figure shows a reference circuit of USB_BOOT interface.
Module
USB_BOOT
VDD_EXT
10K
Test point
TVS
Close to test point
Figure 21: Reference Circuit of USB_BOOT Interface
State
Response
Idle
RI keeps in high level.
URC
RI outputs 120ms low pulse when a new URC is reported.
Pin Name
Pin No.
I/O
Description
Comment
USB_BOOT
75
DI
Force the module to enter
emergency download mode
1.8V power domain.
Active high.
If unused, keep it open.

Quectel BG96 Specifications

General

Brand	Quectel
Model	BG96
Category	Control Unit
Language	English