When assembling the pan supporter
(bracket) pay special attention to the
correct positioning of its mandrel. The
mandrel features a cut for its unique
positioning against the pan handle, thus
preventing their contact and friction.
Setting pan’s bracket:
- On assembling the pan bracket onto
the mandrel, turn the bracket slightly,
so that the cut on the mandrels are
located in their unique and correct
position,
- When turning the mandrel use most
gentle movements not to damage
moisture analyzer’s measuring
system.
4.3. Level setting
Before plugging to mains, level the moisture analyzer using
adjustable feet. Turn the feet in a way that the air bubble of
the level is located centrally.
4.4. Standard delivery components
• A moisture analyzer MAC series
• Insert of drying chamber basis.
• Drying chamber shield.
• Drying pan handle.
• Drying pan bracket.
• Disposable pan.
• Power cord.
• User manual (CD).
4.5. Cleaning
Remember to unplug the moisture analyzer from mains before any
cleaning activities.
Clean the moisture analyzer using a damp cloth by gentle rubbing
contaminated places.
To Next Page
Loading...
Need help?
General
