RADWAG MAC Series User Manual

50
17. SET OF COMPUTER – MOISTURE ANALYZER COMMANDS
Function INTERFACE RESET
Command R CR LF (zeroing of currently carried out commands, i.e. “tare”
which waits for stable result).
Function SEND ALL IMPLEMENTED COMMANDS FROM THE
INSTRUMENT
Command PC CR LF (sends information on all implemented commands in
the program from the instrument)
Function SEND STABLE RESULT IN BASIC UNIT
Command S CR LF (sends result in basic unit from the instrument on stable
mass readout)
Function IMMEDIATELY SEND THE RESULT IN BASIC UNIT
Command SI CR LF (sends result in basic unit from the instrument)
Function SEND THE RESULT IN CURRENT UNIT

RADWAG MAC Series Specifications

General

Brand	RADWAG
Model	MAC Series
Category	Laboratory Equipment
Language	English