9.4. Backlight of measurement result (display backlight)
The function enables switching on and off backlight of measurement result on
the display.
OFF - backlight disabled
On - backlight enabled
Aut - backlight disabled automatically if measured indication does not
change within 10 seconds.
CAUTION
Moisture analyzer software has implemented option of automatic
backlight switch off bl = Aut. In case of this setting, the backlight is
switched automatically off if measurement results does not change
within 10 seconds. Backlight is automatically activated at the moment of
weighing result change on moisture analyzer’s display.
To Next Page
Loading...
Need help?
General
