106
ESP-LXIVM Series Controllers
Select Location for Controller
Select a location that:
• Easily accessible and allows for comfortable viewing
• Has a fl at wall surface
• Near 120 VAC or 230/240 VAC power source (depending on
model)
• Is safe from potential vandalism
• Is outside the range of operating sprinklers
Gather Installation Tools
Before beginning installation, gather these tools and materials:
Slotted head screw-
driver
Phillips head screw-
driver
Thin blade screw-
driver
Lineman’s pliers
Torpedo level
Hammer
Grounding strap
2-Wire maxi cable
(#14 awg wire)
#8 Awg or #10 awg
bare ground wire
DBR/Y-6 connec-
tors
Tape measure
Wire stripper
Wire nuts
Marking pencil
Electric drill (or
hammer drill if
installing in
masonry or
concrete wall)
Waterproof caulk-
ing
Select Controller Location
15 in.
(38,1 cm)
14.32 in.
(36,4 cm)
12.69 in.
(32,2 cm)
Eye Level
Cabinet depth
5.5 in (14 cm)
Depending on model
120 or 220/240 VAC
wiring in conduit
Field wiring
in conduit
Wall
Grade
To Next Page
Loading...
Need help?
General
