P/N 016-4010-001 Rev. A 87
SLINGSHOT
DIAGNOSTIC TROUBLE CODES (DTC)
FIGURE 23. Diagnostic Trouble Codes Screen
The Diagnostic Trouble Code screen displays active and past diagnostic trouble codes (DTCs) that occur during
RS1 system operation. Active DTCs must be fixed before the RS1 system can be enabled for guidance and steering
operation. Once a DTC has been corrected, the code moves to the inactive DTC code list. Refer to Figure 3 for an
example of DTCs and DTC summaries.
FIGURE 24. Diagnostic Trouble Codes Screen
NOTE: In Figure 3 above, inactive DTC is 2.01 and the DTC summary is “No Ethernet Connection.”
•Pressing the Info button displays the complete description of the highlighted active DTC.
•Pressing Clear deletes the inactive DTCs from the Inactive DTC error log.
Diagnostic Trouble
Code (DTC)
DTC Summary
To Next Page
Loading...
Need help?
General
