CHAPTER
3
Hydraulic System Installation: 11
CHAPTER 3
HYDRAULIC SYSTEM
INSTALLATION
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized.
Before beginning the RS1/HDU hydraulic
installation, turn off the machine and relieve
pressure by turning the steering wheel left and
right.
Never work on a hot machine. Always allow it to
cool before performing diagnostics,
maintenance, or routine service.
When disconnecting or purging hydraulic hoses,
be aware that the hydraulic fluid within the
machine’s system may be extremely hot and
under high pressure.
Tampering with hydraulic valves may cause
serious injury or death, and will void the warranty.
CAUTION
When installing hydraulic components,
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the steering
hydraulic valve.
To Next Page
Loading...
Need help?
General
