Raven TC1 User Manual

3
Hydraulic System Installation: Install the Load Sense Hoses 19
HYDRAULIC SYSTEM INSTALLATION
INSTALL THE LOAD SENSE HOSES
1. Locate and disconnect the machine’s load sense hose from the right side of the steering orbital.
FIGURE 15. LSPV Connection on Steering Valve
2. Connect the machine’s load sense hose to the fitting installed in Port LSPV of the steering valve.
FIGURE 16. Load Sense Hose Installed on Steering Orbital
3. Install the straight end of the supplied hydraulic hose (P/N 214-1000-958) on the open load sense port on the
steering orbital.
Installed Load
Sense Hose
(P/N 214-1000-
958)

Raven TC1 Specifications

General

Brand	Raven
Model	TC1
Category	Control Systems
Language	English