Chapter 6: Adjusting Autopilot Settings 55
6 Adjusting Autopilot Settings
Chapter 6: Adjusting Autopilot Settings
This chapter explains all of the calibration settings you can adjust on
the autopilot system. You will have adjusted many of these settings
when commissioning the system (see Chapter 5), and they should not
require further adjustment.
The order of the calibration screens and the options you can select
depend on the type of course computer connected to your RayPilot:
• for information about Calibration mode with Type 150/150G
and Type 400/400G course computers, refer to page 56
• for information about Calibration mode with Type 100/300
course computers, refer to page 66
Note: Complete the procedures described in Chapter 5 before
adjusting any calibration settings.
81013_4.book Page 55 Wednesday, July 25, 2001 11:04 AM
To Next Page
Loading...
Need help?
General
