2. Attach a power supply.
Adapter/Charger
Reference Marks
POWER
Indicator
Power Connector
1. Connect the power connector’s
connector flush against the back of the
small plug into the
DC
OUT jack
camcorder, and slide it in the direction
on the adapter/charger.
of the arrow as shown.
2. Align the reference mark on the
3. Plug the adapter/charger’s plug into an
power connector with the mark on
operating outlet. The adapter/
the camcorder. Hold the power
charger’s
POWER
indicator will light.
Charged Battery*
__~-
1. Match the reference mark on the
battery to the reference mark on the
camcorder.
2. Hold the battery flush against the
camcorder and slide it in the
direction of the arrow.
* The battery must be charged before it can be used the first time.
Details are on page 18.
(continued on next page)
9
To Next Page
Loading...
Need help?
General
