Power Zoom Buttons
“W”
a&
“p
I
LOCUS
LOCK
Button
Auto Focus
Macro Focus
The camcorder will focus automatically.
No indicators appear in the viewfinder
during auto focus.
Notes:
The low-contrast indicator
(-%*i
-) in
the viewfinder indicates the auto-
focus system may not operate correctly due to
low illumination, low or no contrast, repeated
patterns, or two subjects at different distances
overlapping. Focus the camcorder manually.
If the camcorder has been zoomed in on the
subject and the auto-focus system cannot
achieve proper focus, the camcorder will
automatically zoom out. This may allow the
focys system to focus properly. If proper
focus still cannot be achieved, adjust the focus
manually.
The auto-focus system may be used for
recording subjects very close to the
camcorder. Increased illumination may
produce better results.
1. Press power zoom button
“Up’
until
the lens is completely zoomed out.
2. Position the subject or scene in the
center of the viewfinder.
in
CAMERA
I
j ’
34
To Next Page
Loading...
Need help?
General
