Optional Car Cord Adapter
The optional DCCOS car cord shown on
page
2
allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
1Zvolts to a 6-volt output.
Note:
Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
/
Using the DCCOS Car Cord Adapter
~-----------~~~.-_l.~
Cigarette
POWER
Indicator
Optional DCCOS Car Cord Adapter
1. Place the
POWER
switch in
OFF
to
turn off the camcorder.
POWER
indicator turns off.
2. If the battery is attached to the
camcorder, remove it.
3. Hold the power connector flush against
the back of the camcorder and slide it
to the right in the direction of the
arrow as shown.
4. Take the vehicle’s cigarette lighter out
of the socket.
5. Insert the car cord’s cigarette lighter
plug into the vehicle’s cigarette lighter
socket. The
POWER
indicator on the
car cord adapter will light.
6. Place the
POWER
switch in
CAMERA
to turn on the camcorder. The
POWER
indicator lights.
20
To Next Page
Loading...
Need help?
General
