10
Operating the Receiver
Tuning the Receiver
1. Push the FM/AM button on the receiver (or the AM•FM
button on the remote) to activate the tuner.
2. Press the FM/AM button on the receiver (or the AM•FM
button on the remote) again to select the FM or AM band.
Tuning
Press the FF on your remote button to move up the AM or FM
band.
Press the REW button on your remote to move down the AM
or FM band.
Auto Tuning
Use the AUTO feature to automatically search for stations of
sufficient strength.
Press AUTO on your receiver (or the INPUT•SEEK button on
your remote) to put the receiver into AUTO mode. “AUTO”
appears in the display. Press TUNING up or down button on
the receiver to search. The tuner finds and stops on the next
station whose frequency is strong enough to be received. To
continue the search, press TUNING up or down button again.
Storing Stations in Memory
You can store up to 30 AM and FM stations. These stations can
be stored in random order.
To Store a Station
1. Press the FM/AM button on the receiver (or the AM•FM
button on the remote) to turn on the receiver.
2. Select the band—FM or AM.
3. Select the station you want to store in memory using the
methods described above.
4. Press the PROGRAM button on the remote. “MEMORY”
blinks in the display. While “MEMORY” is blinking, press
number buttons on the remote for the station.
For stations 1, 2 or 3 press 0, then press 1, 2, or 3. For
stations 4 through 30, press the numbers directly.
If the Memory indicator on the
display turns off before you
preset your station selection,
press PROGRAM again.
If the receiver is disconnected
from its power source, the preset
stations are maintained in
memory for up to 7 days.
To Next Page
Loading...
Need help?
General
