24
Using the Playback Features
Auto Play Feature
This feature lets you tell the VCR whether you want it to automatically start playing
a tape that is inserted with the safety tab removed.
1. Press MENU•PROG on the remote to see the VCR
MAIN MENU on the TV screen.
2. Press 6 to display the PREFERENCES menu.
3. Press 2 to select Auto Play: ON or OFF.
• Select ON to have a tape with its safety tab
removed start playing automatically.
• Select OFF if you do not want a tape with its
safety tab removed to start playing
automatically.
Auto Repeat Feature
The VCR will automatically repeat a segment of tape.
1. Locate the beginning of the segment you want the
VCR to repeat, and press STOP.
2. Press DISPLAY to display the time counter, and
press CLEAR to reset it to 0:00:00.
3. Press MENU•PROG on
the remote to see the
VCR MAIN MENU on
the TV screen.
4. Press 6 to display the
PREFERENCES menu.
5. Press 8 to display the
AUTO REPEAT menu.
6. Use the number buttons
to enter the length of
time of the segment you
want the VCR to repeat.
7. Press MENU•PROG to
remove the menu from
the screen.
The VCR will play the
tape until the specified
counter reading is
reached, rewind the
tape and replay the
segment over and over.
8. To stop auto repeat,
display the AUTO
REPEAT menu and
press CLEAR.
To Next Page
Loading...
Need help?
General
