RZ Family / RZ/G, RZ/A Series 4. Parallel to HDMI Converision Board
R01UH0990EJ0101 Rev.1.01 Page 69 of 83
Jul 28, 2022
4. Parallel to HDMI Converision Board
4.1 Configuration
The Parallel to HDMI Conversion Board is connected to the FFC/FPC Connector (CN5) described in the section
3.1.5 to realize parallel output via the 50mm FPC.
Figure 4.1 shows an example of system configuration using the Parallel to HDMI Conversion Board.
Figure 4.1 Example of System Configuration Using the Parallel to HDMI Conversion Board
(*1): Should be procured on the customer side
SCIF download
(for bootloader
programming)
Host computer
Parallel to HDMI
Conversion Board
RZ/G2UL
50mm
FPC
Parallel Output
Power supply through
USB Type-C
AC adapter(*1)
RZ/G2UL SMARC Module Board
RTK9743U11C01000BE
RZ SMARC Series Carrier Board
RTK97X4XXXB00000BE