REPLIGEN XCell ATF10 User Manual

XCell
TM
ATF System with C410:V4B Controller User Guide
25
The parameters and configuration within this manual should not be changed without
consultation with a Repligen representative. The controller, when properly maintained and
serviced, should be able to handle almost all cell culture conditions and viscosities.
Should you determine that the controller is not functioning correctly and exchanging the full
volume of the diaphragm pump with each stroke, please immediately contact Repligen for
further assistance.
6.3 Interface and Screens
A Siemens Operator Interface Terminal (OIT) provides the user with the following features:
1. Pump Status including cycle rate, flow rate, pressures, controller status and total batch
cycles
2. Setup Parameters
3. Acknowledge and clear machine faults (i.e. alarms)
4. Process Trending
When an input box is highlighted and pressed; a number pad or keyboard will appear on
screen to enable data input.
For numerical entries as the value is being typed, a Min and Max range dialog box appears,
showing the user the acceptable value range. Any value outside the min/max range, or any
text strings or letters is not accepted.
The OIT will display the following Primary Screens:
Primary Screens – INITIAL, MAIN, SET UP, ALARMS, TRENDING, BATCH, ADMINISTRATOR, LOG
OFF.
Secondary Screens – Screens imbedded within the Primary Screens.
Screen
Description
INITIAL
Initial System Log On which appears when the C410v4B controller first
powers up; unless configured to be “black box”
MAIN
Main Diaphragm Pump Control & Monitoring Displays Real Time Pump
Status Access to all Primary Screens.
SET UP
Users Set Up of Process parameters, Calibration, and Diaphragm Pump
Parameters
ALARMS
Display Diaphragm Pump Warnings and Faults
TRENDING
Graphical Real Time display of Flow Set Point, Exhaust Set Points, Flow
Process Value, Vessel Weight.
BATCH INFO
Batch Set Up Screen
ADMINISTRATION
Setting of users ID, security level and passwords, Close Application, PLC
ON/OFF
LOG OFF
Users logoff

REPLIGEN XCell ATF10 Specifications

General

Brand	REPLIGEN
Model	XCell ATF10
Category	Laboratory Equipment
Language	English