Resource Data Management DMTouch User Manual

www.resourcedm.com
Revision 2.3 Page 69 of 72
Commissioning & Service Guide DMTouch
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
www.resourcedm.com
Appendix 1: Related Part Numbers
Feature Description
Part Numbers
Feature Description
Part Numbers
DMTouch Base model with on board PSU & SSD
PR0510
Energy Saving - Optimisation Features Only
PR0474
On-board battery backup (UPS)
PR0492
Energy Saving - Network Trim Heaters Control
Features only
PR0475
12 Analogue probe input expansion card
PR0460
Energy Saving - Night Blinds Features only
PR0476
3 Relay digital output expansion card
PR0461
Energy Saving - Condenser TD Features only
PR0477
4 x 4 - 20mA Input expansion card
PR0462
Energy Saving - Performance Features only
PR0478
4 x 4 - 20mA Output expansion card
PR0463
Energy Saving - Defrost Warning Features only
PR0479
4 x 0 - 5 or 0 - 10 Volt Output expansion card
PR0464
Energy Saving – All Features
PR0484
4 x 0 - 5 or 0 - 10 Volt Input expansion cards
PR0465
Energy Monitoring Feature Enabler
PR0484-EMON
2 x 0-10 V Input & 2 x 0-10 V Output
PR0466
485 Genus compatible network
PR0480
6 Input (240V Status)
PR0467
IP Network Enabler - Each 32 devices
PR0481
USB to RS485 Network Adapter -2 x 32 devices
PR0482
Wireless Mesh Software Enabler - Each 32 devices
PR0735
USB card reader kit with DMTouch wing cover
PR0493
DMTouch Software Upgrade to Latest Version
DMSWUPG
DMTouch 4 Port hub I/O board upgrade kit
PR0459
Wireless Mesh Software Enabler
PR0735
USB to CANbus Adapter (For use with TDB)
PR0489
ActiveFM
PR0487
Remote Alarm Beacon (Operated from DMTouch
Relay.
PR0458-CLR
The Data Builder
PR0485
USB analogue Modem
PR0491
The Data Builder Lite
PR0485-LITE
Touch XL – Orbit Out Station
PR0617-XXXX
Modbus TCP/IP Interface Enabler
PR0470*
Secondary IP Interface (USB Adapter)
PR0486
BACnet Interface Enabler - Max 32 devices
PR0471
USB/485 Modbus Adapter for DMTouch
PR0623
Siemens NetRS/NetPX Interface Enabler
PR0483*
USB/485 Tektronics® Adapter for DMTouch
PR0470-TEK
Cbiss Gas Interface
PR0498*
Wireless Mesh USB Adapter
PR0734
Shuttle USB Logger Interface Enabler
PR0499
XLON RS485 or FTT-10A Adapter
PR0488-485 or
FTT
Pack Shutdown Support (Intelligent Load Shedding)
PR0484-PSS
Wireless Mesh Ethernet Router
PR0732
Carel® Webgate Enabler
PR0490-CWG
RCS Interface Enabler
PR0470-RCS
CPT and Predictive Alarming Functions
PR0487-CPA
Plant Backup
PR0468-PB
The options below indicate if the part number is software only, hardware only or hardware & software.
Hardware only, plug and play. No software activation required.
Hardware & Software activation required. Software activation included in price.
Software only.
* IP Network Enabler required. Once the interface is enabled each device which logs on to the DMTouch takes up one position out of a
block of 32 IP devices. Doesn’t apply to Computer/Laptop or Orbit Outstation connections.
Please note if the DMTouch has a battery backup kit fitted and the DMTouch is being transported then the battery must be removed from
the DMTouch and fitted in the cardboard retaining filler which ships with the DMTouch to prevent damage during transit. RDM
recommend that the DMTouch is restarted, once the installation is complete, if any new hardware is connected for example part PR0482.
Please refer to the appropriate installation guide, found on the RDM website, before installing any of the above additional hardware.

Resource Data Management DMTouch Specifications

General

Brand	Resource Data Management
Model	DMTouch
Category	Control Panel
Language	English