Rheem IKONIC RTGH-SR11i User Manual

IKONIC Tankless Water Heater Service Manual
30
USER INTERFACE AND OPTIONS
2. Press the “▼” or “▲” button until “Tankless Cong”
is displayed, and press “ENTER” to conrm.
3. Press the “▼” or “▲” button until “Manifold heaters”
is displayed, and press “ENTER” to conrm.
4. The factory setting is “1”.
Press the “▼” or “▲” button to select the number of
heaters of be managing “1” to “20”, and press
“ENTER” to conrm. To exit this setting, press
“BACK”.
NETWORK INSTANCE
1. Press the “SETTINGS” button.
2. Press the “▼” or “▲” button until “Network instance”
is displayed, and press “ENTER” button to conrm.
3. The factory setting is “1”. Press the “▼” or “▲” but-
ton to select “1” to “20” for each water heater, and
press “ENTER” to conrm. To exit this setting, press
“BACK” button until the Home screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
Tankless ConfigSET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
None
SETTINGS
BACK ENTER
STATUS SERVICE MODE
OFF
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Recirc.Pump Mode
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Manifold Heaters
SETTINGS
BACK ENTER
STATUS SERVICE MODE
10
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
115
°F
Press button
to access
“SETTINGS”
Menus
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Network Instance
SETTINGS
BACK ENTER
STATUS SERVICE MODE
10

Rheem IKONIC RTGH-SR11i Specifications

General

Brand	Rheem
Model	IKONIC RTGH-SR11i
Category	Water Heater
Language	English