Edit the options as required.
System Users
This section covers programming of the system users.
The Rhino Panic Pack has a total of 100 users.
User 00 defaults to PANIC and all other users default to “Not in Use”.
User Type
The user type defines the level access the user has in order to operate the system. This option allows
the selected user type to be assigned. User 00 (Master) type cannot be changed. When a User Type is
selected, the default User Options are applied for the selected user. Only the enabled User Options
can be changed for the selected User Type.
0 Not in use
The selected user is not in use and all User Options are disabled.
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Panic
The selected user is a panic user and can only perform the panic alarm function from their remote
control. Only user Option 4 is enabled.
User Cell No
Not used.
User Options
Each user can be assigned one or more user options:
1 Reserved
2 Reserved
3 Reserved
4 Generate a Panic alarm
On: The selected user can generate a panic alarm from their remote control.
Off: The selected user cannot generate a panic alarm.
5 Reserved
6 Receive priority alarms from the system.
Not used.
7 Reserved
6 Add/Delete/Edit User List via SMS Interface
Not used.
22
To Next Page
Loading...
Need help?
General
