RHINO ADVANCED PANIC PACK User Manual

Users Programming Page
To program the users and assign them a remote control, click on the “Users” icon in the
“Programming” section on the left hand navigation bar:
The System Users page will open, showing the current settings for each user:
Double-click on the user you want to edit and the “User Properties” dialog opens:
Edit the user properties as required, then click “Apply” to update. Click “Next” or “Previous” to move
through the user list. When finished, click on the “Close” button.
Learning a remote control to a User
The procedure below shows how to learn a wireless remote control to a user within the Rhino UDL
software.
1. Ensure that the Rhino UDL is connected to the Rhino Panic Pack.
2. Open the “User Properties” dialog for the user you want to assign a remote control to.
3. Select Panic as the user type.
4. Click on the “Learn” button to learn a remote control. The system will remian in “Learn Mode” for 1
minute
23

RHINO ADVANCED PANIC PACK Specifications

General

Brand	RHINO
Model	ADVANCED PANIC PACK
Category	Security System
Language	English