Printing Options
101
5
Limitation
❒ This function does not work with doc-
uments larger than A5K, B5 JISK,
A4K, 8
1
/
2
"u11"K or 8
1
/
2
"u5
1
/
2
"K.
When A5K, B5 JISK, A4K,
8
1
/
2
"u11"K or 8
1
/
2
"u5
1
/
2
"K size pa-
per is loaded in the machine, each page
of the received document is printed on
a single sheet. When A5L, B5 JISL,
A4L, 8
1
/
2
"u11"L or 8
1
/
2
"u5
1
/
2
"L
size paper is loaded in the machine,
each page of the received document is
rotated and printed on a single sheet.
❒ If paper matching the size and ori-
entation of a received document is
available, Combine Two Originals
is not possible.
❒ If Combine Two Originals and 2
Sided Print are selected at the same
time, 2 Sided Print takes priority
and Combine Two Originals is can-
celed.
Note
❒ You can turn this function on or off
with the User Parameters. See p.167
“User Parameters” (switch 10, bit 1).
❒ This function uses Memory Reception.
Page Separation and Length
Reduction
If the size of a received document is
longer than the paper loaded in the
machine, each page of the document
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, this func-
tion splits the document if the docu-
ment length is 20 mm (0.79") or longer
than the paper used. The document is
reduced if it is less than 20 mm (0.79").
When a document is split, an asterisk
(*) is inserted at the split position and
about 10 mm (0.39") of the split area is
duplicated on the top of the second sheet.
Note
❒ Your service representative can cus-
tomize this function with the follow-
ing settings:
•Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split
❒ You can adjust the overprinting and
reduction lengths within the follow-
ing ranges:
• Overprinting length: 4 mm (0.16"),
10 mm (0.39"), 15 mm (0.59")
• Guideline for split: 5-155 mm
(5 mm steps)/0.2-6.1" (0.2" steps)
To Next Page
Loading...
Need help?
General
