Administrator Setting
156
9
Box Setting By using SUB and SEP Codes
with these functions, you can
send documents to another
party's box, and retrieve docu-
ments stored in boxes.
p.181 “Box Settings”
Transfer Report Before using Transfer Re-
quest, you need this Transfer
Report setting.
p.192 “Transfer Report”
Program Confidential ID Registers an ID required for
Confidential communication.
p.192 “Programming a Confi-
dential ID”
Program Polling ID Registers an ID required for
Polling communication.
p.193 “Programming a Polling
ID”
Program Memory Lock ID Registers an ID required for
Memory Lock reception.
p.194 “Programming a Memo-
ry Lock ID”
Select Dial / Push Phone Selects a line type when you
connect the machine to a G3
analog line.
Note
❒ This function is not avail-
able in some areas.
p.194 “Selecting Dial/Push
Phone”
Reception File Setting Selects whether received doc-
uments are saved on the hard
disk to be printed later or
printed immediately without
being saved.
p.195 “Storing or Printing Re-
ceived Documents”
Stored RX File User Setting Set the password to view re-
ceived and stored documents
using a Web Image Monitor or
DeskTopBinder Lite.
p.197 “Setting a User for
Viewing Received and Stored
Documents”
Menu Protection Settings Set protection so only the Ad-
ministrator can change menu
settings.
p.198 “Menu Protection Set-
tings”
Folder Transfer Result Report Set whether the Folder Trans-
fer Result Report is transmit-
ted to the specified e-mail
address when folders are pro-
grammed as the forwarding
destinations to which docu-
ments are sent from all send-
ers or Special Senders.
p.198 “Folder Transfer Result
Report”
Function name Description Reference
To Next Page
Loading...
Need help?
General
