Available Colour Functions
This section introduces the machine's colour functions that you are likely to use most often.
Colour Copying
You can switch the colour copy mode depending on the type of originals used and the desired finish.
You can also erase or convert a certain colour in the original, or add a background colour to the whole
page.
See p.107 "Colour Functions".
Primary Colours
Colours can be created by combining the three primary colours: yellow, magenta, and cyan. Black
can be made by combining yellow, magenta and cyan, however, as there might be some slight
differences, “black” will be expressed using a black toner.
Full Colour
Copies using four colours: yellow, magenta, cyan, and black.
Black & White
Copies in black and white even if the original is coloured.
9
To Next Page
Loading...
Need help?
General
