4. Select the paper type ([OHP (Transparency)] or [Thin Paper]) in Special Paper.
5. Specify the paper size, and then press [OK].
6. Place the originals, and then press the [Start] key.
• Printing on special paper such as OHP transparencies and thin paper may be slower than printing on
plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
Copying onto Thick Paper
When copying onto thick paper, select the type and size of paper.
1. Open the bypass tray, and then insert the paper face down until you hear the beep.
2. Align the paper guides to the paper size.
3. Press [Bypass], and then press the [ ] key.
4. Press [Select Thick Paper].
5. Select the paper type (one of [Thick Paper 1], [Thick Paper 2], and [Thick Paper 3]), and
then press [OK].
Select [Thick Paper 1] when paper weight is between 106 g/m
2
(28 lb.) and 169 g/m
2
(45 lb.).
Select [Thick Paper 2] when paper weight is between 170 g/m
2
(45 lb.) and 220 g/m
2
(58.5 lb.).
Copying from the Bypass Tray
49
To Next Page
Loading...
Need help?
General
