Copier / Document Server Features
120
3
Adjust Colour Image
This section describes the user tools in the Adjust Colour Image menu under
Copier / Document Server Features.
Default settings are shown in bold type.
❖ Background Density of ADS (Full Colour)
"The background density is adjusted to skip the texture and copy. You can ad-
just the background density up to 5 levels when in Full Colour.
Centre of the 5 level adjustment is set by default.
❖ Colour Sensitivity
You can adjust the colour specified to convert in "Colour Convert" and the
colour specified for "Erase Colour", in 5 levels.
Centre of the 5 level adjustment is set by default.
When the colour width has been set to "Wider", and the colour to be deleted,
for example is red, all the colours that are close to magenta and orange are de-
leted. If it's set to "Narrower" the colour red will be deleted.
❖ A.C.S. Sensitivity
This 5-step setting determines the level of the standard used for discriminat-
ing between black & white originals and full colour originals when "Auto
Colour Select" is selected.
Centre of the 5 level adjustment is set by default.
❖ A.C.S. Priority
This setting determines the copy priority between "Black & White" and "Full
Colour" when "Auto Colour Select" is selected.
• Full Colour
• Black & White
Reference
p.3 “Accessing User Tools”
To Next Page
Loading...
Need help?
General
