Ricoh Aficio MP C3500 EFI User Manual

Administrator Tools
85
2
Programming the LDAP server
This section explains how to specify the LDAP server settings.
To enter an identification name
A Press [Change] under "Name".
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
B Enter the server’s identification name.
C Press [OK].
To enter a server name
A Press [Change] under "Server Name".
Register the LDAP server’s host name or IPv4 address.
B Enter the LDAP server name.
C Press [OK].
To enter the search base
A Press [Change] under "Search Base".
Select a route folder to start the search from e-mail addresses registered in the
selected folder are search targets.
B Enter the search base.
For example, if the search target is the sales department of ABC company, en-
ter "dc=sales department, o=ABC". (In this example, the description is for an
active directory. "dc" is for the organization unit, and "o" is for the company.)
Search base registration may be required depending on your server environ-
ment. When registration is required, unspecified searches will result in error.
Check your server environment and enter any required specifications.
C Press [OK].

Ricoh Aficio MP C3500 EFI Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax (optional)
Fax Transmission Speed	33.6 kbps
Print Speed	35 ppm
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	150, 000 pages
Supported Paper Sizes	A3, A4, A5, Letter, Legal
Scan Resolution	600 dpi
Copy Speed	35 cpm
First Print Out Time	6.5 seconds
Operating System Compatibility	Windows, Mac, Linux