Facsimile Features
178
4
E If the password is programmed, enter a password using the number keys,
and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again.
F Press [Delete].
To cancel deleting a box, press [Do not Delete]. The display returns to that of
step
D
.
G Press [Exit].
H Press the {User Tools/Counter} key.
Programming/Changing Information Boxes
This section describes how to set up an Information Box.
You can store the following items:
•Box name (required)
Up to 20 characters long
• SEP Code (required)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
• Password (optional)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
When programming a password, a mark is displayed before the Box name.
A Press [Facsimile Features].
B Press [General Features].
C Press [Box Setting].
D Check that [Program / Change] is selected.
To Next Page
Loading...
Need help?
General
