Registering Addresses and Users for Facsimile/Scanner Functions
220
7
Deleting a User Code
This section describes how to delete a user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Press [Delete].
E Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail ad-
dress, or IP-Fax destination.
F Press [Auth. Info].
G Press [Change] to delete the user code, and then press {q} key.
H Press [OK].
I Press [Exit].
To Next Page
Loading...
Need help?
General
