Printer Features
196
5
PCL Menu
This section describes the user tools in the PCL Menu under Printer Features.
Default settings are shown in bold type.
❖ Orientation
You can set the page orientation.
• Portrait
•Landscape
❖ Form Lines
You can set the number of lines per page.
The number of lines can be specified from 5 to 128 by increments of one.
Default: Metric version: 64, Inch version: 60
❖ Font Source
You can set the storage location of the default font.
• Resident
•RAM
•HDD
•SD
RAM, HDD and SD can be selected only when fonts have been downloaded
to the machine.
❖ Font Number
You can set the ID of the default font you want to use.
The number of font numbers can be specified from 0 to 63 by increments of
one.
The default setting is 0.
❖ Point Size
You can set the point size you want to use for the selected font.
The number of point sizes can be specified from 4.00 to 999.75 by increments
of 0.25.
This setting is effective only with variable-space fonts.
The default setting is 12.00.
❖ Font Pitch
You can set the number of characters per inch for the selected font.
The number of characters per inch can be specified from 0.44 to 99.99 by in-
crements of 0.01.
This setting is effective only with fixed-space fonts.
The default setting is 10.00 pitches.
To Next Page
Loading...
Need help?
General
