1. OVERALL MACHINE INFORMATION
1.1. SPECIFICATIONS
Type
Desktop type transceiver
Circuit
PSTN, PABX
Connection
Direct couple
Document Size
Length:
105 - 357 mm [4.1 - 14.1 ins]
Up to 0.6 m [23.6 ins], manually assisted
Up to 14.0 m [46 ft], after adjustment
Width:
148 - 257 mm [5.8 - 10.1 ins]
Thickness:
0.05 to 0.15 mm [2 to 6 mils]
(equivalent 50 - 80 g/m
2
)
Document Feed
Automatic feed, face down
ADF Capacity
10 sheets (using 20 lb or 80 g/m
2
paper)
Scanning Method
Contact image sensor
Maximum Scan Width
A4 : 210 mm [8.3 ins] ± 0.5% B4
( CHINA ) : 256 mm [10.1 ins] ± 0.5%
Letter : 216 mm [8.5 ins] ± 0.5%
Scan Resolutions
Main scan: 8 dots/mm [203 dpi]
Sub scan:
Standard - 3.85 lines/mm [98 lpi]
Detail - 7.7 lines/mm [196 lpi]
Fine - 15.4 lines/mm [392 lpi]
Memory Capacity ( BRO only )
ECM: 64 kbytes
SAF:
BRO:(ECM on) 148 kbytes
(12 pages/Slerexe letter)
(ECM off) 204 kbytes
(16 pages/Slerexe letter)
China BRO:(TAM on) 256 kbytes
(21 pages/Slerexe letter)
(TAM off) 916 kbytes
(75 pages/Slerexe letter)
Compression
BR0: MH, MR, MMR, EFC, SSC
BR1: MH, MR, EFC, SSC
Protocol
Group 3
Modulation
V.29 (QAM), V.27ter (PHM), V.21 (FM)
Data Rate (bps)
9600/7200/4800/2400,
Automatic fallback
I/O Rate
With ECM: 0 ms/line
Without ECM: 10, 20, 40 ms/line
Transmission Time
BRO: 9 s at 9600 bps
BR1: 20 s at 9600 bps
Measured with G3 ECM using memory for a
ITU-T #1 test document (Slerexe letter) at
standard resolution
Printing System
Thermal Printing
Printer Roll; Thermal paper
North American version:
216 mm X 30 m [8.5 ins X 98.4 ft]
China version:
256 mm X 30 m [10.1 ins X 98.4 ft]
Other versions:
210 mm X 30 m [8.3 ins X 98.4 ft]
Maximum Printing Width
North American version: 210 mm [8.3 ins]
China version: 250 mm [9.8 ins]
Other versions: 204 mm [8.0 ins]
Print Resolutions
Main scan: 8 dots/mm [203 dpi]
Sub scan: 15.4 lines/mm [392 lpi]
Power Supply
USA : 115 ±20 Vac, 60 ±3 Hz
China : 220 ±20 Vac, 50 ±3 Hz
Asia : 220 - 240 V, 50/ 60 ±3 Hz
Operation Enviroment
Temperature: 17 ~ 28 °C [63 ~ 82 F]
Humidity : 40 ~ 70 %Rh
August 7th, 1995 OVERALL MACHINE INFORMATION
SPECIFICATIONS
1-1
To Next Page
Loading...
Need help?
General
