2. Getting Started
This chapter describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
1. ADF
If
you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one. See “External
items”.
This document feeder can be used for two-sided originals.
2. Exposure glass
Place originals here face down.
3. Internal tray guide
Open out and raise the end fence to support large paper.
35
To Next Page
Loading...
Need help?
General