• Areas with corrosive gases.
Access to the machine
This section describes the clearance areas to be provided when placing the machine.
Place the machine near the power source, providing the clearance areas shown.
1. Rear: 6 cm (2.4 inches) or more
2.
Right: 1 cm (0.4 inches) or more
3. Front: 75 cm (29.6 inches) or more
4. Left: 1 cm (0.4 inches) or more
• For the required space when additional items are installed, contact your service representative.
Power Connection
This section describes power supply.
• Connect this machine only to a power source that matches the specifications shown in
“Specifications for the Main Unit” in this manual and do not use an extension cord.
•
Use of this machine with extension cords and power sources other than those that match the
specifications shown constitutes an electric shock and fire hazard.
• Power cords that are damaged, broken, modified, trapped under heavy objects, pulled hard, or
bent severely are electric shock and fire hazards.
Where to Put Your Machine
97
To Next Page
Loading...
Need help?
General