Message Cause Solution
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not turn off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before operation is resumed.
Operation is not possible while this
message is displayed.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
A specified destination or
sender's name was cleared
when the destination list in
the delivery server was
updated.
Specify the destination or sender's
name again.
When Data Cannot Be Sent Due to a Problem with the Destination
Message Cause Solution
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
The specified group contains
either an e-mail destination
and/or folder destination
that is not supported by the
specified transmission
method.
In the message that appears at each
transmission, press [Select].
"SMTP authentication email
address and administrator
email address mismatch."
The SMTP authentication e-
mail address and the
administrator's e-mail
address do not match.
For details about how to set SMTP
authentication, see "File Transfer",
Connecting the Machine/ System
Settings.
When Other Messages Appear
197
To Next Page
Loading...
Need help?
General
