Ricoh MP W6700 User Manual

5. Press [OK] twice.
Copying onto Custom Size Paper from the Bypass Tray
Paper that has a horizontal length of 210.0–914.4 mm (8.3–36.0 inches) and a vertical length of
182.0–2000.0 mm (7.2–78.7 inches) can be fed in from the bypass tray. Note however that the
limitation on the horizontal and vertical length range will vary depending on which options are installed.
1. Load the paper face up in the bypass tray.
The bypass tray (
) is automatically selected.
2. Press the [ ] key.
3. Press [Paper Size].
4. Press [Custom Size].
5. Enter the horizontal size with the number keys, and then press [ ].
6. Enter the vertical size with the number keys, and then press [ ].
7. Press [OK] twice.
Registering a custom size
You can register one custom paper size. This allows you to recall the settings quickly, which is
convenient if you often use a certain type of paper that the machine does not detect automatically.
Copying from the Bypass Tray
65

Ricoh MP W6700 Specifications

General

Warm-up time	120 seconds
Power source	220 - 240 V, 50/60 Hz
Print Speed	6.7 ppm (A1 horizontal)
Resolution	600 dpi
Maximum Print Width	914 mm
Media Types	Plain paper
Connectivity	USB 2.0, Ethernet 10/100/1000 Base-T
Dimensions	1, 250 x 755 x 1, 200 mm
Original Size	24 inches
Memory	512 MB
Paper weight	52 - 110 g/m²
Supported paper sizes	A4 - A0
Paper input capacity	2 rolls