Ricoh MP W6700 User Manual

Hold Print
Sending a Hold Print file
1. Click the WordPad menu button in the upper left corner of the window, and then click
[Print].
2. In the "Select Printer" list, select the printer you want to use.
3. Click [Preferences].
4. In the "Job Type:" list, click [Hold Print].
5. Click [Details...].
6. Enter a User ID in the "Enter User ID:" box.
You can optionally set a file name of a Hold Print file.
7. To specify the print time of the document, select the [Set Print Time] check box, and then
specify the time.
You can specify the time in 24-hour format.
8. Click [OK].
9. Change any other print settings if necessary.
10. Click [OK].
11. Start printing from the application's [Print] dialog box.
Printing a Hold Print file using the control panel
• When printing is completed, the stored file will be deleted.
1. Press the [Home] key on the top left of the control panel, and press the [Printer] icon on
the [Home] screen.
DHJ243
Hold Print
77

Ricoh MP W6700 Specifications

General

Warm-up time	120 seconds
Power source	220 - 240 V, 50/60 Hz
Print Speed	6.7 ppm (A1 horizontal)
Resolution	600 dpi
Maximum Print Width	914 mm
Media Types	Plain paper
Connectivity	USB 2.0, Ethernet 10/100/1000 Base-T
Dimensions	1, 250 x 755 x 1, 200 mm
Original Size	24 inches
Memory	512 MB
Paper weight	52 - 110 g/m²
Supported paper sizes	A4 - A0
Paper input capacity	2 rolls