Ricoh Printer User Manual

12
0
Information Codes During Faxing
Please note when a problem occurs during faxing, only “Communication Error”
will be shown in the LCD-display. The information codes which indicate possible
causes will only be shown in the Fax Activity Report. To print the Fax Activity
Report, simply select “Yes” or “Error only” in the “Transmission Report” option
when you press the “User Tools” button and choose Fax Settings and then
Options in succession.
Code Description/Cause
0 Fax is done & OK.
0200 Error occurs, but cause is unknown since your fax machine has not
received fax message from the remote fax machine.
Check the remote fax machine and then try again.
0201
No Dial Tone
"Detect Dial Tone" is enabled and there is no dial tone detected.
0202
1. Your fax machine receives wrong fax message from the remote
fax machine. Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call service.
0203
No fax response.
The remote modem or fax modem has not sent fax message within
the specified time.
Check the remote fax machine and then try again.
0204 Destination line is busy.
Waits a few seconds, then try again.
0205 User has cancelled the job during scanning or transmission.
0207 1. Your fax machine receives wrong fax message from the remote
fax machine. Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3. If the error still occurs, please call service.
0209 The remote fax machine may be disconnected.
Check the remote fax machine and then try again.
0212
1. Your fax machine receives wrong fax message from the remote
fax machine. Please try again or use another line.
2. The line quality is poor. Please try again or use another line.
3.
If the error still occurs, please call service.

Ricoh Printer Specifications

General

Brand	Ricoh
Model	Printer
Category	Printer
Language	English