4. Copying Originals
Basic Operation
1. Place the original on the exposure glass.
2. To print multiple copies, press the [Number of copies] key until the number of copies you
want to print is displayed.
Holding down the [Number of copies] key increases the number in increments of 10.
3. Press the [Start] key.
• If a paper jam occurs, printing stops halfway. Open the maintenance cover to remove the jammed
paper. Printing will resume automatically after the maintenance cover is closed. If the maintenance
cover is not opened to remove jammed paper, press the [Start] key to resume printing.
• If the paper runs out, replenish it, and then press the [Start] key to resume printing.
39
To Next Page
Loading...
Need help?
General