EasyManuals Logo

Ricoh SP 110 SU User Manual

Ricoh SP 110 SU
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Problem Solution
Paper gets wrinkles. Paper is damp. Use paper that has been stored properly.
Paper is too thin. See page 21 "Supported Paper".
If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
The printed paper is curled. Load the paper upside down in the paper tray.
Paper is damp. Use paper that has been stored properly.
Images are printed diagonally to the
pages.
CER091
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
Removing Printing Jams
First, try removing the paper automatically. If this fails, remove it manually.
Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
Automatically removing the paper jammed inside the machine
1. Open and close the maintenance cover once.
The machine will then slowly eject the jammed paper. After the jammed paper is ejected, remove it.
Paper Feed Problems
65

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP 110 SU and is the answer not in the manual?

Ricoh SP 110 SU Specifications

General IconGeneral
BrandRicoh
ModelSP 110 SU
CategoryPrinter
LanguageEnglish

Related product manuals