Specifications of the Machine
This section lists the machine's specifications.
General Function Specifications
Configuration
Desktop
Print process
Laser electrostatic transfer
Maximum paper size for scanning of exposure glass
216 mm × 297 mm (8.5 × 11.7 inches)
Maximum paper size for printing
216 mm × 356 mm (8.5 × 14 inches)
Warm-up time
Less than 25 seconds (23 °C, 71.6 °F)
Paper sizes
A4, 8
1
/
2
" × 11 " (Letter), 8
1
/
2
" × 14 " (Legal), B5, 5
1
/
2
" × 8
1
/
2
" (Half Letter), 7
1
/
4
" × 10
1
/
2
" (Executive), A5, A6, B6, 16K (197 × 273 mm), 16K (195 × 270 mm), 16K (184 × 260 mm), 8
" × 13 " (F/GL), 8
1
/
2
" × 13 " (FS), 8
1
/
4
" × 13 " (Folio), Custom Paper Size
• The following paper sizes are supported as custom paper sizes:
• Approximately 90-216 mm (3.6-8.5 inches) in width
• Approximately 148-356 mm (5.8-14 inches) in length
Paper type
Plain Paper (65-99 g/m
2
(17-26 lb.)), Recycled Paper (75-90 g/m
2
(20-24 lb.)), Thin Paper
(52-64 g/m
2
(14-17 lb.)), Thick Paper (100-130 g/m
2
(26.6-34 lb.))
Paper output capacity
10 sheets (70 g/m
2
, 19 lb.)
Paper input capacity
50 sheets (70 g/m
2
, 19 lb.)
Memory
16 MB
9. Appendix
80
To Next Page
Loading...
Need help?
General