Loading Paper
This section explains how to load paper into the paper tray and the bypass tray.
• When loading paper, take care not to trap or injure your fingers.
For information about supported paper, precautions for storing paper and print areas, see page 34
"Supported Paper".
Loading Paper into Tray 1
The following example explains how to load paper in the standard paper tray (Tray 1) of SP
377DNwX.
All models are loaded in the same way.
• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,
inside the rear cover. Leaving the levers lowered can cause print quality problems when printing on
paper other than envelopes.
1. Pull out tray 1 carefully with both hands.
Place the tray on a flat surface.
2. Paper Specifications and Adding Paper
20
To Next Page
Loading...
Need help?
General